thin film chip induct or tf02 800 800 700 700 700 700 700 700 700 560 560 560 560 560 440 440 440 440 440 440 440 380 380 380 380 380 380 380 380 340 340 320 320 280 280 260 260 260 idc max (ma) tf02-0n2_-rc tf02-0n3_-rc tf02-0n6_-rc tf02-0n9_-rc tf02-1n0_-rc tf02-1n1_-rc tf02-1n2_-rc tf02-1n4_-rc tf02-1n5_-rc tf02-1n6_-rc tf02-1n7_-rc tf02-1n8_-rc tf02-1n9_-rc tf02-2n0_-rc tf02-2n1_-rc tf02-2n2_-rc tf02-2n3_-rc tf02-2n4_-rc tf02-2n5_-rc tf02-2n6_-rc tf02-2n7_-rc tf02-2n8_-rc tf02-2n9_-rc tf02-3n0_-rc tf02-3n1_-rc tf02-3n2_-rc tf02-3n3_-rc tf02-3n4_-rc tf02-3n6_-rc tf02-3n7_-rc tf02-3n8_-rc tf02-3n9_-rc tf02-4n7_-rc tf02-5n4_-rc tf02-5n6_-rc tf02-5n9_-rc tf02-6n8_-rc tf02-7n2_-rc tf02-8n0_-rc allied part number i nduct ance (nh) t oler an ce min. srf min. (ghz) dcr max. ( ) 13/500mhz 14 14 14 14 14 12 10 10 10 10 10 8 8 8 8 8 8 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 5.5 5.5 5.5 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.25 0.25 0.25 0.25 0.25 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.45 0.45 0.45 0.45 0.45 0.45 0.55 0.55 0.55 0.55 0.55 0.65 0.85 0.85 0.85 1.05 1.05 1.25 1.25 (mhz) b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s f, g, h, j rohs allied components interna tional 949-356-1780 www.a lli edcom pon en ts .com dimensions: inches (mm) 700 tf02-1n3_-rc 10 0.25 b, c, s 800 700 tf02-0n4_-rc tf02-0n5_-rc 14 14 0.10 0.15 b, c, s b, c, s 380 tf02-3n5_-rc 6 0.55 b, c, s 340 tf02-4n3_-rc 6 0.65 b, c, s 280 tf02-6n5_-rc 6 1.05 220 220 220 tf02-8n1_-rc tf02-8n2_-rc tf02-9n1_-rc 5.5 4.5 4.5 1.25 1.25 1.35 all specif icat ions subject t o change wit hout not ice. features ? 0402 size smd suitable for pick and ? photolithographic single layer ceramic ? inductance stable in high frequency electrical inductance range: .2nh to 33nh tolerance: as noted from +/-0.1nh to 5% idc: current at which the inductance will operating temp: -40oc to +85oc physical packaging: 10000 pieces per 7 inch reel. ? low profile under .327mm! resistance to soldering heat: per mil-std-202 method 210e marking: none value without current. 08/26/2015 to complete part number insert tolerance designator: b=0.1nh, c=0.2nh, s=0.3nh, f=1%, g=2%, h=3%, j=5% 220 3.7 j ? high srf and q values 0.0390.001 (1.00.05) 0.0120.001 (0.320.05) 0.0190.001 (0.50.05) 0.0070.003 (0.20.10) 12 8 8 3.7 3.3 3.1 3.1 2.8 2.8 2.5 2.5 180 130 100 100 180 90 90 75 75 200 200 0.35 1.35 1.55 1.75 1.75 1.95 2.15 2.55 2.65 3.25 4.50 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz 13/500mhz b, c, s b, c, s b, c, s b, c, s f, g, h, j f, g, h, j f, g, h, j f, g, h, j f, g, h, j f, g, h, j f, g, h, j f, g, h, j f, g, h, j 13/500mhz 13/500mhz b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s b, c, s q factor tf02-10n0_-rc tf02-10n8_-rc tf02-12n0_-rc tf02-13n8_-rc tf02-15n0_-rc tf02-17n0_-rc tf02-18n0_-rc tf02-20n8_-rc tf02-22n0_-rc tf02-27n0_-rc tf02-33n0_-rc test frequency: 500mhz test method: 260oc +/-5 for 10 seconds, test equipment (l&q): hp4287 + agilent 1619b tf02-0n8_-rc b, c, s 13/500mhz 14 0.15 700 i nduct ance (nh) 0.2 0.3 0.6 0.9 1.0 1.1 1.3 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.3 2.4 2.5 2.6 2.8 2.9 3.0 3.1 3.2 3.3 3.5 3.6 3.8 3.9 5.4 5.6 6.5 6.8 10.0 1.4 0.4 0.5 4.7 7.2 33.0 8.0 8.1 8.2 9.1 10.8 12.0 13.8 15.0 17.0 18.0 20.8 22.0 27.0 1.2 2.2 2.7 3.4 3.7 4.3 5.9 0.8 place automation inductor circuits drop by no more than 10% from initial
|
